Top 37 best Mobile Repairing tools and equipment with name and functions

 22,802 total views,  1 views today

The main things that you have to keep in mind while purchasing mobile repairing tools.

One thing that you must keep in mind while purchasing Mobile Repairing Tools is that you purchase mobile repairing tools only once, after that we do not buy them again for a long time, you have not gone towards cheap tools. You have to buy good quality mobile repairing tools.

You have to buy tools that can work comfortably. I have 15 years of experience in mobile repairing. I will give you some related information related to mobile repairing tool in this website, if you use it then you will not have any problem in using it, it can be a bit expensive but when If you do mobile repairing, then you will not face any problem.

When you buy the tools, you will be happy for a long time, you are not going to have any complaints.

👉Buy Mobile Repairing Tools online

List of best Mobile Repairing Tools in India

1. No. 1 Best Soldering Iron

Click on the Image to Purchase this Mobile Repairing Tools
Best Soldering Iron, Mobile Repairing Tools

Soldering iron is used to remove capacitor resistance diode transistor regulator speaker microphone and mobile display etc. in mobile phone repairing. 50 watt soldering iron is enough to do mobile repairing. When you buy soldering iron, you have noticed this Keep in mind that when you use the soldering iron, it should not be hotter than the place from where you will hold it.

A lot of bits also come with the soldering iron. You have to notice that those pits are changeable, meaning you can change them and those bits should be anti static so that when you take off or attach a component to it, it is not damaged.

I will recomend you to use iron of Soldron, which I also always use when you use this iron, you will not feel the need to use any other iron because this iron heats up very quickly and mobiles. Capable of doing all kinds of work in repair

2. Soldering station

Click on the Image to Purchase this Mobile Repairing Tools
Soldering station, Mobile Repairing Tools

Soldering station consists of two things, first, a stand for holding iron and second, inside the iron soldering station, you get an option to reduce the temperature. The soldering station is better than normal iron because when you have to solder on small components. You can reduce the temperature and when you have to remove the charging jack, you can increase the temperature.

3. PCB Stand / PCB Holder

Click on the Image to Purchase this Mobile Repairing Tools
PCB Stand / PCB Holder, Mobile Repairing Tools

PCB holder is used to hold any kind of motherboard, so when you are repairing on the motherboard, the motherboard does not move here and there are many types of PCB stand. In this, PCB stand also comes behind low quality and high quality, you should use only PCB stand of good quality.

If the PCP holder is heavy in weight then it is of good quality. If it is light in weight then its quality is low.

4. Best Solder Wire

Click on the Image to Purchase this Mobile Repairing Tools
Best Solder Wire, Mobile Repairing Tools

Soldering wire is used to connect the charging jack or IC or any component inside the motherboard with the motherboard. The soldering wire can be melted. When iron is applied to it, it melts and the component or charging check or any component that can be attached to the motherboard is added. There are many types of soldering wires.

If we talk in the common language, the soldering wire also comes very thin, it also comes in medium size and also comes in thick size. Now the question arises as to what you have to use.

See if you have to install components, then you use a very fine soldering wire and if you want to install a charging jack, then you can use a medium size soldering wire. But one thing you have to keep in mind is that you have to use only good quality soldering wire.

The soldering wire that will be mixed inside the soldering wire is of good quality. Because when you put the soldering wire on the computer, the components are very strong due to the pest, which will not be pest in the soldering wire, that soldering wire is not good, I will recommit you to use the soldering wire of Bharti company because it My experience has a very good quality soldering wire and it is not too expensive.

5. Best Multimeter

Click on the Image to Purchase this Mobile Repairing Tools
Best Multimeter, Mobile Repairing Tools

Multimeters are of two types. One is analog and one is digital. Digital multimeter is used in most mobile repairing. Because to check any component or tracks, a digital multimeter is the right one, because in this we get to know the exit value. For mobile repairing, you should use a good quality multimeter. Now the question arises that –

How to check which is a good multimeter for Mobile Repairing

The multimeter in which the positive and negative wire on continuous mode is attached to the beep, the sooner the beep will sound, the better the multimeter is. If connecting the two wires in a multimeter causes the voice to be delayed, then that multimeter is not very sensitive.

6. Antistatic Mat / ESD Mat

Click on the Image to Purchase this Mobile Repairing Tools
Antistatic Mat / ESD Mat, Mobile Repairing Tools

Anti static mat is to protect against current of electricity. Where we do the repairing, the antistatic mat is placed there and we do the repairing by keeping all the tools on our Twitter and so on. It has fine wiring inside. So that even if electricity comes on suddenly, then we do not suffer any loss.

You must use this type of mat and it also gives you a separate place to hold the accessories of mobile repairing and another advantage is that it does not burn when you apply heat or hot air over it. If it does not burn, then it also benefits you.

7. Best Microscope / Magnifier

Click on the Image to Purchase this Mobile Repairing Tools
Best Microscope / Magnifier, Mobile Repairing Tools

The microscope is used to enlarge the components inside the motherboard. It gets inside different zoom. Such as 2x, 3x, 5x, 10x etc. There are also many microscopes that are attached to the computer and inside the computer we can see the components enlarged. The components inside the motherboard are very fine. It is very difficult to repair them without a microscope.

That is why we need a microscope. With the help of which we can enlarge those components and under the microscope we can repair them as well. Light is also fitted inside the microscope, with the help of which we can see the fine components more thoroughly. The microscope costs around 15 to ₹ 20000 in Indian currency.

8. Magnifying Lamp

Click on the Image to Purchase this Mobile Repairing Tools
Magnifying Lamp, Mobile Repairing Tools

Magnifying lamps are used to enlarge components. But it is not as powerful as a microscope. But it is used mostly because there is a tube light inside it. If we see something from inside, then we will see it grow up and secondly because of the tubelight, we will also see that component very clear.

It is adjustable, we can change its position wherever and where you want. So what should you use in mobile repairing.

9. SMD(Surface Mount Device) / Hot Air Blower

Click on the Image to Purchase this Mobile Repairing Tools
SMD(Surface Mount Device) / Hot Air Blower, Mobile Repairing Tools

s.m.d. We can also call hot air blower. It is used to remove and place any component inside the motherboard. The components are s.m.d. Can also be removed without. But if we s.m.d. If we use, the work of installing and unloading components is done very quickly. But it should be used only if you can use it, if you use it without learning, then it can also cause damage on the motherboard.

s.m.d. There are many types. I will recommit you that you will always be of very good quality s.m.d. Please use only. Because the smd the better quality, the more it will have the power to control air and heat.

10. Complete mobile repairing tool kit

Click on the Image to Purchase this Mobile Repairing Tools
Complete mobile repairing tool kit
, Mobile Repairing Tools

Now I will suggest you a tool kit in which you will find all kinds of tools for mobile repairing. You can take this tool kit anywhere. With the help of which you can earn money by repairing anywhere. All the tools you will find in this tool kit will be of good quality.

11. Precision Screwdriver / Screwdriver Kit

Click on the Image to Purchase this Mobile Repairing Tools
Precision Screwdriver / Screwdriver Kit
, Mobile Repairing Tools

If the screw is not opening while repairing in a smartphone, then the Precision screwdriver comes in handy at that time. With the help of Precision Screw Driver we can open any type of screw. It also has a magnet

12. Mobile Phone Opener

Click on the Image to Purchase this Mobile Repairing Tools
Mobile Phone Opener
, Mobile Repairing Tools

Mobile phone opener is used to open the body or housing of the mobile. Mobile phone openers come in two types of material. The first is plastic and the second is metal. You always have to use a plastic opener. The plastic opener reduces the chances of damage. If you use the metal opener, keep in mind that it should be very thin and it should not be too thick and should not be too thin.

If we open the mobile phone with the help of opener, then the risk of getting damaged inside the mobile is reduced. But while using the opener, keep in mind that the opener does not go too far inside.

13. Cleaning Brush

Cleaning brushes for mobile repairing are not common brushes. Inside these brushes you will also find soft brushes and hard brushes. When we change the display, at that time there is a lot of jam inside the body. To remove it, we need a hard brush and if we want to clean the charging jack, then we have to use a soft brush there. Therefore the cleaning brush has a very important role in mobile repairing.

Now the question arises

Which liquid should we use for cleaning?

Click on the Image to Purchase this Mobile Repairing Tools
Cleaning Brush, Mobile Repairing Tools

I would suggest that you can use petrol for cleaning. You can use FALCON. But do not use THINNER at all. Because it is seen from thinner that sometimes the phones become dead.

14. Tweezers

Click on the Image to Purchase this Mobile Repairing Tools
Tweezers, Mobile Repairing Tools

When we do mobile repairing, we need a twigger when installing components IC or jumper wire. Or when we separate the charging jack from the motherboard, at that time we need a Tweezer. With the help of tweezer we can separate any component or IC from the motherboard. I would suggest you to use only Tweezer of good quality in mobile repairing. Use one whose tip is very thin. When you remove the component, use a thin teacher and when you remove the charging jack or IC cover, use a thick twigger.

15. DC Power Supply

Click on the Image to Purchase this Mobile Repairing Tools
DC Power Supply, Mobile Repairing Tools

DC power supply is used when the mobile phone battery is either defective or is completely down. In that case, the DC power supply is used instead of the battery. If the motherboard is defective in the mobile, then it is also known about it. We can also boost the battery with DC power supply. There are many types of DC power supply.

Normal also comes and heavy duty also. Within normal, you will only be able to turn on the phone. Within the heavy duty DC supply, you can also remove the shorting inside the mobile, because you can set the ampere in it. With the help of which you can also remove the shorting of the phone.

16. Battery Booster/battery charger booster

Click on the Image to Purchase this Mobile Repairing Tools
Battery Booster/battery charger booster, Mobile Repairing Tools

Battery booster is used inside mobile repairing when the battery of any phone is completely down. The battery is then boosted in that condition. Boosting again brings the voltage or current inside the battery and after that the battery starts charging from the normal charger as well. Battery Booster is also called Battery Charger Booster.

17. Battery Tester

Click on the Image to Purchase this Mobile Repairing Tools
Battery Tester, Mobile Repairing Tools

With battery tester device, you can check the help or condition of any battery.

18. Test JIG Box

With this device, you can check the condition of any mobile without the battery. In this, you can attach all the parts separately in the mobile. By which you will know which part is the problem and which part is correct.

19. LCD Tester

With LCD Tester you can check the lcd or display of any mobile. There is software of every kind of phone inside it. You just have to attach that LCD and some functions are run in it, so that you can check any display.

20. BGA Kit

Inside the BGA Kit you will find stencil and to reball ic there is every kind of stencil and soldering paste. So that you can also reball any ic

21. Infrared Workstation / IRDA

When you place the motherboard under it inside the infrared workstation, heat comes out of it. But this heat is in infrared form. Its specialty is that even if you keep your hand, nothing will happen to your hand. But if you place the motherboard of a mobile phone under it, then only the components that will be affixed to the shoulder above the mother board will leave their place. Meaning, this machine only targets soldering components that are removable.

Even if you keep plastic under it, it does not burn. The solder itself is heated under it. You can repair any mobile without worrying about it. The part that has to be changed, only that part leaves its place, there is no harm to the rest of the motherboard.

22. Ultrasonic Cleaner

The motherboard of the mobile phone is cleaned inside this cleaning box. For that you have to use a special cleaner. Which you get with this cleaning box. You have to put that cleaner in it and put it on by putting it in electricity and all the removeable parts are mounted on top of the motherboard, such as front camera back camera and charging latches flex, all these parts have to be separated. Only keep the motherboard and put that motherboard inside it.

After some time the motherboard becomes absolutely clean. If there is water on the motherboard, then all the water drains out. This makes the condition of the motherboard completely new.

23. Jumper Wire

Click on the Image to Purchase this Mobile Repairing Tools
Jumper Wire, Mobile Repairing Tools

Tracks are made above the motherboard. Many times, those tracks are broken because of water or due to the fall of the phone. The problem comes in the phone due to brake tracks. Then those tracks are made with the help of jumper wire. Or the prints on the back of the charging jack go awry. So the jumper wire is used to supply those prints from elsewhere. The jumper wire buskali is a very thin wire. Which is colored on By removing that color, the wire can be attached anywhere with the help of a shoulder.

24. Soldering paste

Click on the Image to Purchase this Mobile Repairing Tools
Soldering paste, Mobile Repairing Tools

Soldering paste is used to apply IC. When we attach the IC on the motherboard, the IC is reballed before soldering paste. The ic is then mounted on top of the motherboard. There is also a lot of quality in this. When you use the soldering paste, then you have to take care of one thing that after using it, keep its lid closed properly. If its cover remains loose then the paste dries up. There is a paper under the lid, do not throw the paper, and close the lid with that paper. This does not spoil the soldering paste quickly.

25. Paste Flux

Click on the Image to Purchase this Mobile Repairing Tools
Paste Flux, Mobile Repairing Tools

When you add a component or charging jack on top of the motherboard, then you use the shoulder. But the solder is not able to hold it there. Therefore Paste Flux is used. If you use good quality Paste Flux. So the stitch is absolutely fixed and the component or charging jack or any part you are installing does not come off quickly.

26. Liquid Flux

Click on the Image to Purchase this Mobile Repairing Tools
Liquid Flux, Mobile Repairing Tools

Liquid paste is also like simple paste. The only difference is that it is more powerful. When you have to install a component more firmly or the surface on which that component is not attached, then you can attach the component anywhere using liquid paste.

27. Thinner

Click on the Image to Purchase this Mobile Repairing Tools
Thinner, Mobile Repairing Tools

The thinner is used to clean the PCB. In most mobile phone repairing, the thinner is also known as IPA or Isopropyl Alcohol. Nowadays a lot of adulteration has started in it. For this, you should use thinner of good quality. But whenever you clean the PCB with its help, do not attach the PCB to the battery connector for at least half an hour. Until the thinner flies well.

28. Blade Cutter

Click on the Image to Purchase this Mobile Repairing Tools
Blade Cutter, Mobile Repairing Tools

Blade cutters are also very used in mobile phone repairing. You should use blade cutters of good quality. When you place a jumper wire, the jumper wire is cut with the help of a blade cutter or if a track is to be found above the motherboard, even if the blade is cut with the help of a blade cutter. If the blade cutter is of good quality then you will be able to repair the motherboard.

29. Point Cutter

Click on the Image to Purchase this Mobile Repairing Tools
Point Cutter, Mobile Repairing Tools

Point cutter is very much used in mobile repairing. If something is cut inside the mobile with the point cutter, then the point cutter is cut. You can also remove the jumper wire and IC cover with a point cutter. That’s why you make point cutters of good quality. Because you need it again and again.

30. Long Nose Plier

Click on the Image to Purchase this Mobile Repairing Tools
Long Nose Plier, Mobile Repairing Tools

Mobile repairing requires a Long Nose Plier to catch any fine detail. We can also use tweezer. But if a screw is to be pulled out and it is not opening with a screwdriver, then you have to pull it out with the help of Long Nose Plier.

31. Cleaning Sponge

Click on the Image to Purchase this Mobile Repairing Tools
Cleaning Sponge, Mobile Repairing Tools

Cleaning Sponge is used to clean bits of iron. When we use iron, it is that carbon accumulates on top of the bit. Cleaning Sponge is being used to clean that carbon, you have to add some water and it gets bigger or forgets by itself. After that you can move the iron bit over it and it clears the iron bit

32. Desoldering Wick/Desolder Remover Wick Braid/Soldering Accessory Metal Color Tin/Desoldering Wire

Click on the Image to Purchase this Mobile Repairing Tools
Desoldering Wick/Desolder Remover Wick Braid/Soldering Accessory Metal Color Tin/Desoldering Wire, Mobile Repairing Tools

De soldering wire is used to remove excess solder. Or a charging jack is also used to separate it from the motherboard. With this help, you can remove the charger around the charging jack and when all the solder is out, the charging jack will automatically separate from the motherboard.

33. Wrist Strap/Anti Static Wrist Strap for Electronic Devices

Click on the Image to Purchase this Mobile Repairing Tools
Wrist Strap/Anti Static Wrist Strap for Electronic Devices, Mobile Repairing Tools

The Anti Static Wrist Strap is worn in our hands when we do mobile repair. Due to which the current born inside the mobile does not go inside our body. It does not cause any harm to us and there is no loss inside the motherboard as well, which would be unnecessary. He will go to the ground through Anti Static Wrist Strap. Neither will there be any damage to the motherboard nor will you be harmed.

34. Antistatic Hand Gloves

Click on the Image to Purchase this Mobile Repairing Tools
Antistatic Hand Gloves, Mobile Repairing Tools

Antistatic Hand Gloves also prevent static current from entering our body. We do no harm when doing mobile repairing.

35. Antistatic Apron

Click on the Image to Purchase this Mobile Repairing Tools
Antistatic Apron, Mobile Repairing Tools

The Antistatic Apron dress is worn when we do mobile repair. This prevents the static current from entering us.

36. Smoke Observer | Fume Extractor | Soldering Fume Absorber

Click on the Image to Purchase this Mobile Repairing Tools
Smoke Observer | Fume Extractor | Soldering Fume Absorber, Mobile Repairing Tools

When we do a mobile repair, at that time any work is done with iron or smd, then smoke comes out of it. That smoke goes inside our body through our breath, which is very harmful for our body. That’s why the Smoke Observer device is used. The job of Smoke Observer is that all the smoke that goes out inside the Smoke Observer device and the smoke does not go inside our body. Which saves us from the smoke emanating from mobile repairing. You must also use Smoke Observer.

Disclaimer:

If you use all these tools in mobile repairing, then you will have a lot of ease in repairing. In this article, I have told about mobile repairing tools as well as how these tools are used.